BRASS CRAFT SS GAS CONNECTOR 3/4

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Gas leak detectors liquid size 2 ounces Used for natural, LP gas, mixed, manufactured, and LP gas-air mixtures.

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

CANNER STEAM GUAGE

GAS CONNECTOR Y 1/2 1/2M/F 36

3/8" x 3/8", forged brass gas ball valve, flare x flare, 1 piece body, csa 3-88 certified, csa certified, chrome plated forged brass ball.

1/2" x 1/2", forged brass gas ball valve, flare x flare, 1 piece body, csa 3-88 certified, csa certified, chrome plated forged brass ball.

Key Features

Quarter-turn lever handle for positive On/Off operation
Coated aluminum handle for corrosion and solvent resistance
Multi-directional flow
One-piece body for leak resistance and long valve life

Gas ball valves for heaters - flare x fip quarter turn lever flare x fip ins.=9/16 x 1/2

Forged brass 1-piece body. Chrome-plated forged brass ball. Coated aluminum handle. 9/16-24 fine thread flare for 3/8 in tube.

Brass craft gas ball valve, series: SC, angle, 5/8 in, flare x fip end connection, lp/propane, lp gas-air mixtures, forged brass body, 32 - 125 deg F, 6.9 in length x 4.9 in width x 1.9 in height, standards: CSA certified, for indoor and outdoor use.

REGULATOR LP GASS LOW PRESSURE(R

GAS REGULATOR 780707

MANIFOLD TEE INV FLX1/4MT (FOR G

PIGTAIL

These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.

Male hard nose POL (7/8 in. nut) x 1/4 in. male inverted flare
1/4 in. hose I.D.
Tank connection: POL